Carpet flooring provides the ultimate comfort feeling underfoot and comes in a wide array of colors and patterns to match the décor of any room of the house it is laid in. It's also great for safety, as it provides some cushioning against slips and falls.

However, carpet floors are notorious for attracting stains, dust, dirt, and allergens. They also hide germs pretty well. As a result, a high level of maintenance is required to keep carpets clean and looking like new.

While regular vacuuming of your residential carpet floors helps to get rid of the loose dirt, deep carpet cleaning is necessary to remove the ground-in dirt from the carpet fibers. This leaves your carpet floors looking better and smelling fresher. Deep cleaning also makes carpets last longer.

Although professional carpet cleaners rely on a variety of techniques to effectively clean their clients' carpets, hot water extraction and dry cleaning are the two main carpet cleaning techniques that they use.

Keep reading to find out how each carpet cleaning process works.

Hot Water Extraction

As the name suggests, this carpet cleaning process requires using hot water to remove dirt from carpets. The process requires pre-vacuuming your carpets to remove any dry dirt that may turn into mud when the water has been applied to the carpets.

The next step involves using a high-pressure jet spray to inject hot water into the carpet. This allows for deeper penetration of the water into the carpet fibers, ensuring a more thorough clean. The water is then vacuumed out of the carpet, removing the built-up dirt. The carpet is then left to dry: this shouldn't take longer than a day.

If there's any spot treatment that needs to be done, it should be done prior to extraction.

Dry Cleaning

Just like hot water extraction, this carpet cleaning method requires pre-vacuuming the carpet to remove any loose dirt particles. Despite the name, it also uses water to get the dirt out of the carpet. However, it requires relatively smaller amounts of water to get the job done.

With dry cleaning, a solution of carpet cleaning solvents and water is used to treat the carpet. This cleaning solution breaks down the oily residue that makes dirt stick in the carpet fibers, makes it easier to remove the dirt. A machine fitted with rotating pads is then used to absorb the dirt, leaving your carpet looking clean and smelling fresh.

Because less water is used in dry carpet cleaning, carpets typically dry up faster than when hot water extraction is performed.

Need quality carpet cleaning service? Don't hesitate to contact a professional carpet cleaner near you today, like Ed's Cleaning Service.

Share